High Hardness PCD Diamond Tools / PCD Tipped Drills 25~430 Mm Diameter
PCD Diamond Tools Introduction
PCD End Mills for cutting plastics, aluminum and al-alloys
1. pcd step end mills with Multi- tips.
2. Application For plastics, aluminum, al-alloys, carbon, ceramics and every kind of non-ferrous materials
3. Straight flutes end mill with PCD blade
PCD Diamond Tools Parameters
| PCD Recommended Cutting Condition |
| Work piece |
Cutting Speed |
Depth of Cut |
Feed Rate |
| (m/min) |
(mm) |
(mm/rev) |
| Aluminum(5~8% SI ) |
350~1600 |
0.05~2.50 |
0.10~0.40 |
| Aluminum(8~12% SI ) |
350~1300 |
0.05~2.50 |
0.10~0.40 |
| Aluminum(14~18% SI ) |
160~800 |
0.05~2.50 |
0.05~0.25 |
| Copper |
350~1000 |
0.15~2.50 |
0.05~0.20 |
| Sintered Carbid |
15~25 |
0.05~0.60 |
0.10~0.20 |
| Glass Fiber |
100~800 |
0.15~0.50 |
0.03~0.25 |
| Carbon |
160~700 |
0.15~2.50 |
0.15~0.40 |
| High Aluminum |
70~250 |
0.05~1.50 |
0.03~0.15 |
| Ceramics |
| Wood |
1000-2500 |
0.2~5.0 |
010~0.50 |
Quality Control:
1. Strict raw material selection to guarantee impurity below 200ppm; the binder’s purity over 99.5%.
2. Advanced blending techniques to ensure thorough & even blending of diamond with binder.
3. Scientific formula & synthesis procedures. We can also adjust formula & procedures as per customers’ requirements for the most suitable products.
4. Strict control of other auxiliary materials to guarantee precise dimensions & best quality
